To perform passive surveys, you must have a compatible Wi-Fi adapter. You will need to use a special driver that comes with this product to enable the monitoring features of your compatible Wi-Fi adapter. You will be prompted to install it using an installation wizard.
To perform active surveys, you can use any modern Wi-Fi adapter. However, active surveys give you only a small part of the WLAN picture. To get comprehensive information, passive surveys are mandatory.
To perform predictive surveys, no Wi-Fi adapter is required. In predictive surveys, commonly referred to as "RF planning", Wi-Fi characteristics are predicted for the virtual environment model created by the user.
Download TamoGraph Site Survey
The following adapters have been tested and are compatible with TamoGraph:
802.11be (Wi-Fi 7) Adapters
802.11ax (Wi-Fi 6/6E) Adapters
Alfa AWUS036AXML
2.4 GHz/5 GHz/6 GHz
USB
Windows 10 or higher
Recommended
| ASUS USB-AX56 |
|
2.4 GHz/5 GHz
USB
Windows 10 or higher
Recommended
| D-Link DWA-X1850 |
|
2.4 GHz/5 GHz
USB
Windows 10 or higher
Recommended
FusionFutures AX1800
2.4 GHz/5 GHz
USB
Windows 10 or higher
Recommended
Killer Wi-Fi 6 AX1650w, AX1650x, AX1650s
2.4 GHz/5 GHz
Integrated
Windows 10 or higher
Recommended
See tech. notes
| NETGEAR A8000 |
|
2.4 GHz/5 GHz/6 GHz
USB
Windows 10 or higher
Recommended
| TP-Link Archer TX20U Plus |
2.4 GHz/5 GHz
USB
Windows 10 or higher
Recommended
| TP-Link Archer TX21UH |
2.4 GHz/5 GHz
USB
Windows 10 or higher
Recommended
802.11ac Adapters
Intel AC 3160, 3165, 3168
2.4 GHz/5 GHz
Integrated
Windows 7 or higher
Recommended
Intel AC 7260, 7265
2.4 GHz/5 GHz
Integrated
Windows 7 or higher
Recommended
Intel AC 8260, 8265
2.4 GHz/5 GHz
Integrated
Windows 7 or higher
Recommended
Intel AC 9260, 9560
2.4 GHz/5 GHz
Integrated
Windows 10 or higher
Recommended
Linksys WUSB6400M
2.4 GHz/5 GHz
USB
Windows 8 or higher
Recommended
