Home
Contents

Site Survey Tool - TamoGraph

Prev Page Next Page
 
Introduction
Overview
System Requirements
Driver Installation
Licensing and Trial Version Limitations
Interface Overview
Access Point List
Floor Plan / Site Map
Plans and Surveys, Properties, and Options Panel
Main Menu
Performing a Site Survey
New Project Wizard
Calibration
Configuration
Data Collection
Understanding Survey Types: Passive, Active, and Predictive
Active Survey Configuration
Best Practices, Tips, and Tricks
Survey Job Splitting
Predictive Surveys
Drawing Walls and Other Obstructions
Drawing Attenuation Zones
Placing and Configuring Virtual APs
Working with Presets
Applying Visualizations
Working with Multi-floor Sites
Mixing Real and Virtual Data
Best Practices, Tips, and Tricks
Analyzing Data – Passive and Predictive Surveys
Selecting Data for Analysis
Adjusting AP Locations After Passive Surveys
Splitting an AP into Multiple Unique APs
Working with Multi-SSID APs
Visualization Types
Signal Level
Signal-to-Noise Ratio
Signal-to-Interference Ratio
AP Coverage Areas
Number of APs
Expected PHY Rate
Frame Format
Channel Bandwidth
Channel Map
Requirements
Analyzing Data – Active Surveys
Selecting Data for Analysis
Visualization Types
Actual PHY Rate
TCP Upstream and Downstream Rate
UDP Upstream and Downstream Rate
UDP Upstream and Downstream Loss
Round-trip Time
Associated AP
Requirements
Spectrum Analysis
Hardware Requirements
Spectrum Data Graphs
Performing Spectrum Analysis Surveys
Viewing Collected Spectrum Data
Exporting Spectrum Data
Reporting and Printing
Customizing Reports
Google Earth Integration
Configuring TamoGraph
Plans and Surveys
Properties
Plan / Map
Environment
Client Capabilities
Requirements
Scanner
Options
Colors and Value Ranges
AP Detection and Placement
Visualization Settings
Miscellaneous
Configuring GPS Receiver
Using GPS Configuration Dialog
Finding the GPS Receiver Port Number
Taking Photographs
Voice Control
Using TamoGraph in a Virtual Machine
Frequently Asked Questions
Sales and Support

Customizing Reports

IMPORTANT: Report customization is available to Pro License users only.

The report customization dialog can be accessed by clicking the Customize button and checking the Enabled report customization box.  By using the customization functionality, you can change text colors, fonts, logos, or add additional text to PDF or HTML reports.

The following customization elements are available:

· Heading #1 and Heading #2 – use these fields to modify the default report heading and subheading on the first report page.
· Footer – use this field to modify the default footer text that is placed at the bottom of every report page except the first one.
· Additional summary row and Additional summary text – use these fields to add a row to the report summary located on the first page.
· Logo – this element allows you to replace the default logo on the first page. You can select an image in any common graphic format.
· Colors – use this frame to set custom colors. #1 is for the heading on the first page; #2 is for other headings; #3 is for the background of the tables; #4 is for the table heading text color; #5 is for the main text color.
· Fonts – use this frame to modify the default fonts. #1 is for the heading font; #2 is for the main text font.

Additionally, you may want to Add a page before the report and/or Add a page after the report by checking the corresponding boxes. Clicking Edit opens an editor window where you can enter and format any text and specify the headings for the additional pages.

To apply the new settings, click OK. To restore the default settings, click Default.