Site Survey Tool - TamoGraph

Prev Page Next Page
System Requirements
Driver Installation
Licensing and Trial Version Limitations
Interface Overview
Access Point List
Floor Plan / Site Map
Plans and Surveys, Properties, and Options Panel
Main Menu
Performing a Site Survey
New Project Wizard
Data Collection
Understanding Survey Types: Passive, Active, and Predictive
Active Survey Configuration
Best Practices, Tips, and Tricks
Survey Job Splitting
Predictive Surveys
Drawing Walls and Other Obstructions
Drawing Attenuation Zones
Placing and Configuring Virtual APs
Working with Presets
Applying Visualizations
Working with Multi-floor Sites
Mixing Real and Virtual Data
Best Practices, Tips, and Tricks
Analyzing Data – Passive and Predictive Surveys
Selecting Data for Analysis
Adjusting AP Locations After Passive Surveys
Splitting an AP into Multiple Unique APs
Working with Multi-SSID APs
Visualization Types
Signal Level
Signal-to-Noise Ratio
Signal-to-Interference Ratio
AP Coverage Areas
Number of APs
Expected PHY Rate
Frame Format
Channel Bandwidth
Channel Map
Analyzing Data – Active Surveys
Selecting Data for Analysis
Visualization Types
Actual PHY Rate
TCP Upstream and Downstream Rate
UDP Upstream and Downstream Rate
UDP Upstream and Downstream Loss
Round-trip Time
Associated AP
Spectrum Analysis
Hardware Requirements
Spectrum Data Graphs
Performing Spectrum Analysis Surveys
Viewing Collected Spectrum Data
Exporting Spectrum Data
Reporting and Printing
Customizing Reports
Google Earth Integration
Configuring TamoGraph
Plans and Surveys
Plan / Map
Client Capabilities
Colors and Value Ranges
AP Detection and Placement
Visualization Settings
Configuring GPS Receiver
Using GPS Configuration Dialog
Finding the GPS Receiver Port Number
Taking Photographs
Voice Control
Using TamoGraph in a Virtual Machine
Frequently Asked Questions
Sales and Support

Mixing Real and Virtual Data

There are situations when you may want to combine data collected during a passive on-site survey with the data that you get from predictive surveys. For example, after performing a passive survey, you might find out that some areas on your floor plan lack good signal coverage. To determine the number and best placement of additional APs, you can use virtual APs. Simply place them on the floor plan, draw obstructions to get a realistic RF propagation picture for your environment, and select one of the visualizations to see the results; data from both real and virtual APs will be mixed.

If you no longer need data from virtual APs in your project, you do not have to delete them one by one. You can simply click View => Virtual Objects to show or hide all virtual APs and other objects used in predictive surveys. This will also exclude data from virtual APs from all visualizations.