TamoSoft: Network Analysis Tools & Security Software
Contents

Site Survey Tool - TamoGraph
 
Introduction
Overview
Why to Perform a Site Survey
When to Perform a Site Survey
Survey Types
System Requirements
Driver Installation
Driver Installation Troubleshooting
Trial Version Limitations
License Types
Interface Overview
Access Point List
Floor Plan / Site Map
Plans and Surveys, Properties, and Options Panel
Main Menu
Performing a Site Survey
New Project Wizard
Calibration
Configuration
Data Collection
Understanding Survey Types: Passive vs. Active
Active Survey Configuration
Best Practices, Tips, and Tricks
Survey Job Splitting
Analyzing Data – Passive Surveys
Selecting Data for Analysis
Adjusting AP Locations
Splitting an AP into Multiple Unique APs
Visualization Types
Signal Level
Signal-to-Noise Ratio
Signal-to-Interference Ratio
AP Coverage Areas
Number of APs
Expected PHY Rate
Frame Format
Channel Bandwidth
Requirements
Analyzing Data – Active Surveys
Selecting Data for Analysis
Visualization Types
Actual PHY Rate
TCP Upstream and Downstream Rate
UDP Upstream and Downstream Rate
UDP Upstream and Downstream Loss
Round-trip Time
Associated AP
Requirements
Reporting and Printing
Customizing Reports
Google Earth Integration
Configuring TamoGraph
Plans and Surveys
Properties
Plan / Map
Environment
Requirements
Scanner
Options
Colors and Value Ranges
AP Detection and Placement
Visualization Settings
Miscellaneous
Configuring GPS Receiver
Using GPS Configuration Dialog
Finding the GPS Receiver Port Number
Frequently Asked Questions
Sales and Support

Properties

Using this tab, you can configure the project properties. It includes four panels: Plan / Map, Environment, Requirements, and Scanner. You can collapse or expand panels by clicking on the arrow button on the right-hand side of the panel.