Site Survey Tool - TamoGraph

Prev Page Next Page
System Requirements
Differences between the Windows and macOS Versions
Driver Installation - Microsoft Windows
Wi-Fi Capture Engine Installation - macOS
Licensing and Trial Version Limitations
Interface Overview
Access Point List
Floor Plan / Site Map
Plans and Surveys, Properties, and Options Panel
Main Menu
Spectrum and Networks Panel
Performing a Site Survey
New Project Wizard
Adapter Signal Level Correction
Data Collection
Understanding Survey Types: Passive, Active, and Predictive
Active Survey Configuration
Best Practices, Tips, and Tricks
Survey Job Splitting
RF Predictive Modeling
Drawing Walls and Other Obstructions
Drawing Attenuation Zones
Copying, Pasting, and Deleting Multiple Objects
Undo and Redo
Virtual APs Placement Methods
Manual Placing and Configuring Virtual APs
Antenna Selection
Adjusting Horizontal Antenna Orientation
Creating Vendor-Specific AP Presets
Automatic Placing and Configuring Virtual APs
Reconfiguring Virtual APs
Applying Visualizations
Working with Multi-floor Sites
Mixing Real and Virtual Data
Best Practices, Tips, and Tricks
Analyzing Data – Passive Surveys and Predictive Models
Selecting Data for Analysis
Adjusting AP Locations After Passive Surveys
Splitting an AP into Multiple Unique APs
Working with Multi-SSID APs
AP Rank and Secondary Coverage
Visualization Types
Signal Level
Signal-to-Noise Ratio
AP Coverage Areas
Signal-to-Interference Ratio
Number of APs
Expected PHY Rate
Frame Format
Channel Bandwidth
Channel Map
Analyzing Data – Active Surveys
Selecting Data for Analysis
Visualization Types
Actual PHY Rate
TCP Upstream and Downstream Rate
UDP Upstream and Downstream Rate
UDP Upstream and Downstream Loss
Round-trip Time
Associated AP
Spectrum Analysis
Hardware Requirements
Spectrum Data Graphs
Performing Spectrum Analysis Surveys
Viewing Collected Spectrum Data
Exporting Spectrum Data
Reporting and Printing
Customizing Reports
Google Earth Integration
Configuring TamoGraph
Plans and Surveys
Plan / Map
Client Capabilities
Colors and Value Ranges
AP Detection and Placement
Visualization Settings
Tips Panel
Configuring GPS Receiver
Using GPS Configuration Dialog
Finding the GPS Receiver Port Number
Taking Photographs
Voice Control
Using TamoGraph in a Virtual Machine
Command-Line Options and Configuration Settings
Frequently Asked Questions
Sales and Support

Copying, Pasting, and Deleting Multiple Objects

While working on your RF model, you can copy multiple virtual objects and paste them to the current or a different floor plan. To select multiple objects, hold the Ctrl key (on Windows computers) or the CMD key (on macOS computers) and left-click on each object you would like to add to the selection. Another click on the selected object removes the selection from the given object. Clicking anywhere outside of the selection unselects all objects.  Alternatively, multiple objects can be selected by drawing a frame, i.e. pressing and holding the left mouse button and dragging the mouse.

Once the objects have been selected, you can copy them to clipboard by pressing Ctrl + C (on Windows computers) or CMD + C (on macOS computers,) or by using the Edit => Copy context menu item. Copied objects can be pasted to the same floor plan, a different floor plan within the same project, or even to a floor plan in a different project. To paste objects, use Ctrl + V (on Windows computers,) CMD + V (on macOS computers,) or the Edit => Paste context menu item. You may need to adjust the pasted objects’ positions after pasting.

To delete multiple objects, select them as described above and press the Del key.